- You are here:
- Home
- Powerlock 2.0
- Powerlock
When it comes to absolute sheer toughness, it's hard to think of a tool willing to get dirtier and be pushed harder than the SOG PowerLock.
Since it is still our 16th Anniversary celebration, we are still looking at tools with our logo on them- tools like this SOG PowerLock 2.0.
Just a heads up for anyone in the US looking for a great deal on SOG products. They are offering 20% off on certain models on their website right now.
I have been thinking of getting a small trailer for my bike to carry camp chairs and the like. While driving around the neighborhood yesterday I got a little lost and came across this:
I called the number on the for sale sign, the guy came out and we discussed price until we finally agreed on a good number.
The trailer was far too large for my needs, being about four feet wide!
Almost immediately when I got home out came the tools. First the box came off- this is one of those roof rack pods that people put on top of cars, and is the main reason this trailer was so wide. I'll list the box for sale on a local classified site and probably make much, if not all of my money back.
Once the box was off it was a simple matter of removing the hitch bar (which will also need to be modified once the trailer is thinner) then disassembling the frame.
Once the trailer was in pieces I decided to use the central pipes to cut a couple of shorter rods to attach the two outer frame pieces directly to each other rather than over a foot apart.
It was a hard go using the SOG PowerLock but I made it! I have a hacksaw but it is in my Jeep which is at the dealership for service right now. I also have jigsaws, reciprocating saws and angle grinders which would have been a great help too, but they are in my garage a thousand miles away.
So it's up to hand tools and a small drill that I have here. By the time I killed the drill battery I had managed to get fairly close to having it pretty well put back together.
As you can see it is significantly thinner than it was before, and if I can get my hands on a power saw I can make it a few inches thinner yet.
Megan wants me to put some sidewalls on it and I want to put some d rings on it to have places to tie things down to it. So, there's still some work to do, but I'm done for now since I have to wait for my drill to charge.
I'm thrilled with it so far, although I haven't tried towing it yet. I pulled it with the seller's bike before I bought it, and it was surprisingly easy to haul then. I'm imaging with the pounds it has lost by taking the cargo pod off and removing a couple of feet of pipe it should be even easier.
The rain finally subsided today so I had another chance to go out and work on the trailer again. I had to cut the hitch back somewhat- the curve was set for the original width, which would have made the bike too far off center to be towed properly once the extra width was shed. Unfortunately there was a casualty.
My poor Powerlock got it's lock broken, and now the metal saw/file won't lock open. Before anyone takes any shots at the Powerlock, this one has seen an awful lot of use and I don't think any other tool would have fared any better. At any rate, I am sure SOG will look after it, although I hope they fix this one and not replace it with a newer PowerLock or something else. But, that's a discussion for another time!
I pulled out my Leatherman ST300 to finish the cut and, while it did just as good a job as the PowerLock was doing, I still missed having an actual hacksaw. Or a reciprocating saw, jigsaw or grinder. Luckily I'm heading back to my old place next weekend, so I'll probably take the opportunity to pick up a few tools, but that doesn't get the job done in the meantime!
So here is the finished (for now) product. I'm hoping that once I get my tools I will be able to thin it out a little more so that there is no gap between the deck boards, although I may decide to leave it as is. I dunno- I'll leave it as is for now, and try it out. If it's acceptable the way it is I may keep it like this. The bike is also a little off center, but again, I'll wait until I decide how wide I want it before finalizing that.
It is towable now and doesn't actually feel off center, although TBH I don't really have enough experience hauling a trailer on a bike that I wouldn't necessarily know if it was or not.
I jumped a few curbs with it and the deck boards came loose so I may decide to use some U brackets or bolts to lock them down. Once I decide how long the hitch needs to be I also need to round it off so that it allows for easier turning without catching the rear wheel axle. It doesn't really seem to do that now, but I'm the paranoid type and once I have my grinder it will only take a minute to do.
All in all I'm pretty happy with it as it is now, and once I get my hands on some of my trusty power tools I will make it even better.
If you have any thoughts, questions or comments, feel free to have your say on our forum!
After Megan and I had finished swimming for the day at a friend’s cottage (ie the impending thunderstorm chased us out of the water!) we decided to relax and open a bottle of wine. The only problem being that the rose we had bought had a cork, and we had no corkscrew as I’d misplaced my trusty yellow scaled Compact after our last trip. Luckily I have since found it, but that didn’t help us then!
Going without wine wasn’t an option, so I had to dust off an old trick that Tim Leatherman himself taught me. I’d say that he would be proud of me for remembering it, but as the only tool I had was a SOG PowerLock, I think the shine might come off that a bit…
The Singapore Armed Forces (SAF) recently (circa 2007/2008) began issuing a customized version of the SOG PowerLock EOD Black Oxide to its troops. As far as I know, this is issued to ALL recruits entering Basic Military Training as P.E. (Personal Equipment), which means its yours to keep and not something you have to draw and return from your unit's Quartermaster. It can also be purchased from the SAF eMart (SAF equivalent of the PX) if you want it for about S$70, either using your own money or eMart credit. (eMart credit is a credit-only stipend for purchasing military equipment that gets worn out such as uniforms, boots, webbing, packs, etc).
What I've gathered so far is that this is an SOG PowerLock EOD Black Oxide (not the 2.0) that was procured by ST Logistics (Singapore Technologies Logistics) via Sheares Technologies Pte Ltd for the Singapore Armed Forces. Singapore Technologies is a publicly traded company that amongst other things, manufactures arms, ammunition, military vehicles, naval vessels for Singapore's military and for export. Sheares Technologies is a private company with a storefront that deals mainly with the gadgetry most of us are familiar with, such as tactical flashlights, knives, multi-tools, etc.
This is what the package comes with:
The SOG Powerlock has been out for quite a while and has remained the company's flagship. SOG is a company that is slow to make changes in their tool line. They feel that what they make is darn good and they make changes to their products when they feel the time is right. SOG took a second look at their very popular Powerlock model, made a list of all the pros and cons they have noticed over the years and decided to give this old gal a facelift. Some of the things that SOG focused on with this remodel were the gears that drive the compound leverage of the pliers, new locking system for the tools and the ability to keep their tools from clumping when finding the tool you need.
The first thing you notice when handling the Powerlock 2.0 is the new plier head. SOG worked on a collaboration effort with Paladin tools to create a multitool line for the telecom industry. Those tools became a testing ground for what would become the new Powerlock design.
Well it's been 5 years and many, many miles this tool has been traveling on my side and this is a update of sorts on how it's been holding up.
With so many multitools flooding the market and companies competing with each other for the being the most innovative, SOG Specialty knives has taken the traditional pliers most tools have to the next level. Most tools have the handles attached to the plier's head and the tool folds at the pivots when not in use, even since Tim Leatherman patented it years ago many people have copied this original design and not much design innovation has been made since.
Probably the beefiest set of folding pliers available
What kind of people would write collect and review multitools? Quite simple really- we are designers and do-ers, outdoors types and indoor types, mechanics, doctors, problem solvers and problem makers. As such, we have, as a world spanning community, put every type, size and version of multitool, multifunction knife, pocket knife and all related products to every test we could manage in as many places and environments as there are.